Uniweld VV1 Vapor Vue Charging Device, Visible Vapor, 1/4″ Flare

Uniweld VV1 Vapor Vue Charging Device, Visible Vapor, 1/4″ Flare

Uniweld’s Vapor Vue® absorbs heat naturally and flashes the liquid refrigerant from the cylinder and charges into the system as a vapor. Connecting the Vapor Vue® to the low side of your charging manifold will increase the charging rate up to 8 times faster and the liquid is controlled by adjusting the manifold valve and monitoring the vapor rate trough the double sight glass. Vapor Vue® is factory pressure tested at 800 PSI and can be used to charge any refrigeration & air conditioning system R-410A, CFC, HCFC, & HFC; Zeotropic and Azeotropic refrigerants without the danger of liquid slugging and damaging the compressor. Placing the manifold & Vapor Vue® over hot discharge airflow of the condensing unit will increase the heat exchange and charging rate efficiency. Patent Pending.

Features & Benefits

• For Acetylene regulators with a 7/16-20UNF connection.
• This nut and nipple are of the New Style of Uniweld R-MC regulators only
• The New Style has the seat assemble (parts #4 and 5) that is accessed through the rear of the regulator through the nipple as pictured in the breakdown.
• Regulator pictured in breakdown is a R-B and is for reference only.

Uniweld #92822 CGA 200 Specifications

• Item: Charging Device, Visible Vapor,1/4″ Flare

• Country of Origin (subject to change): United States