Emerson EasyHeat™ HB042 Cable Pipe Freeze Protection 240V

Description

The HB2 heating cable is complete with cold lead and ready for hard-wired installation on metal pipes to prevent freezing.

Pipe Freeze Protection, Constant Wattage, Hard-wired Cable. For Commercial Applications.

Applications

Suitable for outdoor installation for refrigeration, condensation and air conditioning lines that are subject to freezing temperatures.

Features and Benefits

240 Vac operating voltage.
Keeps water flowing at ambient temperatures down to –40°F (–40°C).
Includes ground braid, a black outer jacket, and a 2 ft (0.61 m) orange 14/3 cold lead with no thermostat or plug.
Cables are rated at 7 Watts per foot (0.30 m).
One-year limited warranty.

Watts: 92W
Includes: Ground braid, a black outer jacket, and a 2 ft (0.61 m) orange 14/3 cold lead with no thermostat or plug
Rated At: 7 Watts per foot (0.30 m)
Certifications: UL Listed and CSA Certified to Canadian Safety Standards
Country of Origin (subject to change): United States

Per NEC and CEC requirements ALWAYS use a ground fault protection device (GFEP) to reduce the danger of fire from a damaged or improperly installed heating cable. Electrical fault currents caused by damaged or improperly installed cable MAY NOT BE LARGE ENOUGH to trip a conventional circuit breaker.
Heating cables must be installed in compliance with all national, state/provincial and local codes. Check with your local electrical inspector for specific details.
Use on metal water pipes only. Do not use on plastic pipes.
For outdoor use only. Do not use inside any type of building.
The ambient temperature must be at least -10°C (+15°F) when attaching the cable to the pipe.
This cable does not have an integral thermostat and must be controlled by a separately connected thermostat or by continuous monitoring of a qualified individual.

There are no reviews yet.

Be the first to review “Emerson EasyHeat™ HB042 Cable Pipe Freeze Protection 240V”